Low Profile CamassCrete System

CamassCrete system is a breakthrough in access floor technologies. The system is an achievement and new development amongst Netfloor’s Camass product family. In addition to the traditional access floor’s fundamental functions such as heavy load bearing, high cable capability, CamassCrete facilitates “User Friendly” approaches on “low profile”, “user accessibility” and “systematic cable trench system”, which are generally required at office and school environments nowadays.

The Reticulated Cable Trench System offers high accessibility to office users
The system is competent to install at low profile under 10 cm
Completely non-combustible
Easy and quick accessibility, panels are structured with 4 built-in pedestals

THE SYSTEM — CamassCrete CR1000 Series

The system is composed of 4 main components:UniPanel (main panel), Base Connector, Central Cap and Flank Cap.
For installing below 10 cm (4″), CamassCrete? are available in 5 standard heights.

CR1000-40:height 4 cm (1.57″)
CR1000-50:height 5 cm (1.97″)
CR1000-60:height 6 cm (2.36″)
CR1000-76:height 7.6 cm (3″)
CR1000-100:height 10 cm (4″)

UniPanel (main panel) : Steel in-filled with light weight cement, powder coating. Pedestals are fixed at four corners of the panel.
Base Connector, Central Cap and Flank Cap:are made of steel with corrosion resistance protection
Interlocking by Base Connector : To install, use Base Connector to connect pedestals of the UniPanels. Connecting the UniPanels is easy, with no gluing, nailing or drilling required.
Cable Trenches : Continuous connection of UniPanels, standard-distance grid-form cable trenches formed automatically.

RETICULATED CABLE TRENCH SYSTEM — Easy Routing Of Cables And Fully Accessible

Reticulated Cable Trench is main feature of CamassCrete. The grid pattern cable trench system provides systematic, easy routing and extension of cables. The trench caps to cover the cable trenches shall be installed before or after routing of cables. As all UniPanels are self-standing, lifting or replacing of trench caps are safe, convenient and without resorting to special tools.

IDEAL FOR RENOVATION IN OLD BUILDING AS WELL AS IN NEW OFFICE

Low-profile, accessibility, quiet and quick installation are concerned in case of old office renovations. In real retrofit project, CamassCrete? are often installed on top of old floor trunk, carpet, sheet vinyl, and etc.

SPECIFICATIONS

Module Set:600 mm × 600 mm (23.6″ × 23.6″)
Capacity of Cable Trenches:100 mm width for all CamassCrete systems.
System Height And Cable Trench Capacity:

CamassCrete CR1000 Series
System	Total Height	Cable Trench Clearance
CR1000-100	100 mm	95 mm
CR1000-76	76 mm	71 mm
CR1000-60	60 mm	55 mm
CR1000-50	50 mm	45 mm
CR1000-40	40 mm	35 mm

Main Components
UniPanel (Main Panel):Size 510 x 510 mm (20.07″ x 20.07″). Steel, powder coating in-filled with light weight cement.
Pedestals:Galvanized steel, fixed at four corners. Assembled to system’s required height.
Central Cap:2.5 mm thick steel, corrosion resistance protection with powder coating or electro-deposit.
Flank Cap:2.5 mm thick steel, corrosion resistance protection with powder coating or electro-deposit.
Base Connector:0.6 mm thick steel, black, electro-deposit or powder coating corrosion protection
Flammability:Non-combustible. Meet BS476, part 4, ASTM E-84 class 1.
Loading property
Concentration Load:450 kg < 2.0 mm depression (1,000 LB < 2.0 mm depression) in accordance with ASTM E-196 Uniform Distribution Load:Ultimate uniform load > 4,000 kg per sq. meter.
Other tests:Conducting
Quality Assurance:CamassCrete systems are made of first grade materials. Using of refurbished materials is prohibited.
Warranty:10 years limited warranty. In pursuing quality improvement, the manufacturer reserves the right to vary specifications without prior notice.

PATENT GRANTED

USA:Invention Patent No. 5.630.300
Germany:Utility Model No. 29620106.5
Netherlands:Patent No. 1017802
Russia:Invention Patent No. 22168
England:British Patent No.GB2373796
China:Utility Model No. ZL96200625.4
Japan:Utility Model No. 3032638
Taiwan:Invention Patent No. 127700
South Africa:Invention Patent No. 97/020
——— Worldwide patent pending ———

OVERING: Actile Vinyl for CamassCrete

Netfloor, CamassCrete, Actile is the trademark of Netfloor, Inc. Jindao is Netfloor’s manufacturing factory.

Jindao HS800H/HS1000H/HS1250H HPL Finished Hollow Steel Access Floor Panel With Edge Trim
Panel Type	Panel Grade	Dynamic Load (kN)	Concentrated Load (kN)	Impact Load (kG)	Safety Factor	Uniform Load (kN/m2)	Weight (kG)
HS800H	Medium	3	3.6	50	3	12	8
HS1000H	Heavy	4.5	4.5	50	3	20	10
HS1250H	Extra Heavy	5.5	5.5	50	3	30	12

Jindao HS800HN/HS1000HN/HS1250HN HPL Finished Hollow Steel Access Floor Panel Without Edge Trim
Panel Type	Panel Grade	Dynamic Load (kN)	Concentrated Load (kN)	Impact Load (kG)	Safety Factor	Uniform Load (kN/m2)	Weight (kG)
HS800HN	Medium	3	3.6	50	3	12	8
HS1000HN	Heavy	4.5	4.5	50	3	20	10
HS1250HN	Extra Heavy	5.5	5.5	50	3	30	12

Jindao HS800V/HS1000V/HS1250V Vinyl Finished Hollow Steel Access Floor Panel With Edge Trim
Panel Type	Panel Grade	Dynamic Load (kN)	Concentrated Load (kN)	Impact Load (kG)	Safety Factor	Uniform Load (kN/m2)	Weight (kG)
HS800V	Medium	3	3.6	50	3	12	8
HS1000V	Heavy	4.5	4.5	50	3	20	10
HS1250V	Extra Heavy	5.5	5.5	50	3	30	12

Jindao HS800VN/HS1000VN/HS1250VN Vinyl Finished Hollow Steel Access Floor Panel Without Edge Trim
Panel Type	Panel Grade	Dynamic Load (kN)	Concentrated Load (kN)	Impact Load (kG)	Safety Factor	Uniform Load (kN/m2)	Weight (kG)
HS800VN	Medium	3	3.6	50	3	12	8
HS1000VN	Heavy	4.5	4.5	50	3	20	10
HS1250VN	Extra Heavy	5.5	5.5	50	3	30	12

Jindao Rigid Grid System for HPL/Vinyl Finished Hollow Steel Access Floor System--- Pedestal/Stringer
Pedestal No.	Pedestal Height (mm)	Horizontal Load (kG)	Vertical Load (18 kN)	Pedestal Head	Pedestal Tube	Pedestal Base
FS-L-PST80	80 ± 20	50	Did not collapse	□85mm x 4mm flat	Ф 24mm × 2mm thick	□100mm × 2.5mm thick
FS-L-PST100	100 ± 20	50	Did not collapse	□85mm x 4mm flat	Ф 24mm × 2mm thick	□100mm × 2.5mm thick
FS-L-PST150	150 ± 25	50	Did not collapse	□85mm x 4mm flat	Ф 24mm × 2mm thick	□100mm × 2.5mm thick
FS-L-PST200	200 ± 25	50	Did not collapse	□85mm x 4mm flat	Ф 24mm × 2mm thick	□100mm × 2.5mm thick
FS-L-PST250	250 ± 25	50	Did not collapse	□85mm x 4mm flat	Ф 24mm × 2mm thick	□100mm × 2.5mm thick
FS-L-PST300	300 ± 25	50	Did not collapse	□85mm x 4mm flat	Ф 24mm × 2mm thick	□100mm × 2.5mm thick
FS-L-PST350	350 ± 25	50	Did not collapse	□85mm x 4mm flat	Ф 24mm × 2mm thick	□100mm × 2.5mm thick
FS-L-PST400	400 ± 25	50	Did not collapse	□85mm x 4mm flat	Ф 24mm × 2mm thick	□100mm × 2.5mm thick
FS-L-PST450	450 ± 25	50	Did not collapse	□85mm x 4mm flat	Ф 31mm × 2.5mm thick	□125mm × 4.0mm thick
FS-L-PST500	500 ± 25	50	Did not collapse	□85mm x 4mm flat	Ф 31mm × 2.5mm thick	□125mm × 4.0mm thick
FS-L-PST550	550 ± 25	50	Did not collapse	□85mm x 4mm flat	Ф 31mm × 2.5mm thick	□125mm × 4.0mm thick
FS-L-PST600	600 ± 25	50	Did not collapse	□85mm x 4mm flat	Ф 31mm × 2.5mm thick	□125mm × 4.0mm thick
FS-L-PST650	650 ± 25	50	Did not collapse	□85mm x 4mm flat	Ф 31mm × 2.5mm thick	□125mm × 4.0mm thick
FS-L-PST700	700 ± 25	50	Did not collapse	□85mm x 4mm flat	Ф 31mm × 2.5mm thick	□125mm × 4.0mm thick
FS-L-PST750	750 ± 25	50	Did not collapse	□85mm x 4mm flat	Ф 31mm × 2.5mm thick	□125mm × 4.0mm thick
FS-L-PST800	800 ± 25	50	Did not collapse	□85mm x 4mm flat	Ф 31mm × 2.5mm thick	□125mm × 4.0mm thick
FS-L-PST850	850 ± 25	50	Did not collapse	□85mm x 4mm flat	Ф 31mm × 2.5mm thick	□150mm × 5.0mm thick
FS-L-PST900	900 ± 25	50	Did not collapse	□85mm x 4mm flat	Ф 31mm × 2.5mm thick	□150mm × 5.0mm thick
FS-L-PST950	950 ± 25	50	Did not collapse	□85mm x 4mm flat	Ф 31mm × 2.5mm thick	□150mm × 5.0mm thick
FS-L-PST1000	1000 ± 25	50	Did not collapse	□85mm x 4mm flat	Ф 31mm × 2.5mm thick	□150mm × 5.0mm thick
FS-L-PST1050	1050 ± 25	50	Did not collapse	□85mm x 4mm flat	Ф 31mm × 2.5mm thick	□150mm × 5.0mm thick
FS-L-PST1100	1100 ± 25	50	Did not collapse	□85mm x 4mm flat	Ф 31mm × 2.5mm thick	□150mm × 5.0mm thick
FS-L-PST1150	1150 ± 25	50	Did not collapse	□85mm x 4mm flat	Ф 31mm × 2.5mm thick	□150mm × 5.0mm thick
FS-L-PST1200	1200 ± 25	50	Did not collapse	□85mm x 4mm flat	Ф 31mm × 2.5mm thick	□150mm × 5.0mm thick

Jindao 500mm OA800A/0A800C/OA1000A/OA1000C Bare Finished OA Floor Panel
Panel Type	Description	Concentrated Load/Deflection (kN/mm)	Ultimate Load (kN)	Standard FFH	Weight (kG/m2)
OA800A	300kG Solid OA Floor Panel	Center of the panel: 5000/2.0 Center of the edge: 5000/2.5	Center of the panel: 15000 Center of the edge: 12000	70~200 mm	36
OA800C	300kG Dual Cutout OA Floor Panel	Center of the panel: 4500/2.0 Center of the edge: 4500/2.5	Center of the panel: 12000 Center of the edge: 10000	70~200 mm	36
OA1000A	500kG Solid OA Floor Panel	Center of the panel: 6000/2.0 Center of the edge: 6000/2.5	Center of the panel: 18000 Center of the edge: 14000	70~200 mm	39.6
OA1000C	500kG Dual Cutout OA Floor Panel	Center of the panel: 5500/2.0 Center of the edge: 5500/2.5	Center of the panel: 15000 Center of the edge: 12000	70~200 mm	39.6

THE SYSTEM — CamassCrete CR1000 Series

RETICULATED CABLE TRENCH SYSTEM — Easy Routing Of Cables And Fully Accessible

IDEAL FOR RENOVATION IN OLD BUILDING AS WELL AS IN NEW OFFICE

SPECIFICATIONS

PATENT GRANTED

OVERING: Actile Vinyl for CamassCrete

Related products

TOLI Carpet Tile

Toli Vinyl Sheet

TOLI Vinyl Tile

TOLI Wallpaper

Stair Noising

Raised Floor

Vinyl Transport

Send your Inquiry

Chat with us via WhatsApp

Login